Strap Seal is a kind of seal between a solid seal and a liquid glue seal. It is to wrap the sealing tape on the thread that needs to be sealed, so that the gap of the thread pair is filled with sealing material to form leakage resistance. Commonly used seals come with Teflon tape. The PTFE sealing tape is made of pure polytetrafluoroethylene dispersion resin, which is laminated and stretched at high temperatures. It has the advantages of low friction coefficient, chemical corrosion resistance, and good sealing performance.

Strap Seal Manufacturers china Commonly used Strap Seal has Teflon raw material tape. The PTFE sealing tape is made of pure polytetrafluoroethylene dispersion resin, which is laminated and stretched at high temperatures. It has the advantages of low friction coefficient, chemical corrosion resistance, and good sealing performance. The sealing belt is suitable for the sealing of reaction kettles, steam generators, and various special-shaped tanks and barrels.
Clean and dry the sealing surface, select a PTFE Strap Seal of a certain width, tear off the protective paper of the adhesive tape, stick the sealing tape on the outer edge of the sealing surface, and overlap the ends at a certain bolt, beyond the intersection More than 2cm of each (Note: When used on a flat flange, the two ends must overlap each other. When used on a grooved flange, it can be overlapped in parallel and overlapped by more than 2cm.) Close the corresponding sealing surface and tighten evenly For each bolt, the intersection of both ends will be pressed to the same thickness as other parts, and there will be no leakage at the intersection.
Through the above introduction and analysis of the Strap Seal, hope it helps you.

keyword：

logistics

Product introduction of the Barrier Seal

RFID Cable seal manufacturers take you to understand the handling measures of the cable duct seal

Product introduction of the Barrier Seal

RFID Cable seal manufacturers take you to understand the handling measures of the cable duct seal